Reokorr Gyártási Üzletág, Dunakeszi

CONSTRUCTION OF CONCRETE DUST-PROOFING INDUSTRIAL AND AESTHETIC FLOOR COVERING SYSTEMS Treatment of the subbase and the surface: The floors and the walking surfaces are the most stressed parts of buildings, therefore it is of utmost importance to choose and prepare the proper floor type. Requirements for the subbase are -of min. C16 (B200) quality and 1, 5 MPa tensile strength -dry (water content below 4 %), at least 28 days old -free from cement grout and contaminants -of open pores -of manual or mechanical spread -provided with the planned dilatation We prepare artificial resin coatings for hard asphalt and flooring tile as well. Surface preparation The preparation of the surface is the most important step of the synthetic resin coating process. The dry, mechanical methods are the most efficient. -concrete grinding -particle blasting -grinding by diamond wheel -concrete milling, engraving Mechanical and chemical cleaning is applied for greasy, oily surfaces and contaminated coverings, coatings. Priming: Depending on the receiving surface, the type of the primer can be: -penetrating primer -sticky primer, not onto penetrating surface (e.g. asphalt, flooring tile) -fresh concrete primer -steam-proof or steam-permeable primer for wetting surfaces The most application of the synthetic resin coatings is constituted by our systems applied in 1-3 mm thickness, in 2-3 layers. They can be of many kinds according to the areas of their use and their appearance. They are durable with suitable maintenance and retain their aesthetic nature for a long time. Thanks to their jointless structure, they mean practically an exclusive coating meeting increased hygienic requirements. The thickness (of 1-1, 5 mm) coatings are recommended for low and medium-sized loadings, while the thicness (of 2-3 mm) systems are proposed for medium-sized and higher loading. Theircharacteristics: -wear-resistant, applicable for barrow -extremely cost-saving in 1 mm.